Incoloy 825 Bar

This alloy is also consists of nickel-iron-chromium, and in addition to that molybdenum and copper are also present. This alloy was particularly formed to generate an exclusive nickel steel alloy that has extraordinary resistance to most corrosive environments. It shares similarity with alloy 800, though its resistance to aqueous corrosion is notch higher. Its outstanding resistance has no limits and is viable to both reducing and oxidizing acids, to stress-corrosion cracking, and to the precipitation such as pitting and crevice corrosion. Other than that, it is also resistant to phosphoric acid and sulfuric acids. Alloy 825 is applicable in chemical procedures, equipment that are used to control pollution, oil and gas well piping, reprocessing of nuclear fuel, acid manufacturing, and pickling apparatus.
Properties of incoloy 825
• Exceptional resistance to oxidizing and reducing agents
• Well resistant to stress-corrosion crackling
• Immune to sulfuric and phosphoric acids
• Holds satisfactory mechanical properties at both normal and raised temperatures that could go up to 1020° F
• Resistant to limited attack such as pitting and crevice corrosion

Standards – Incoloy 825 Bar

Summary Standards
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar ASTM B 425

Mechanical Properties – Incoloy 825 Bar

Tensile Strength : Unit – ksi (MPa) , Minimum
Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum
Elongation : in 2″, Unit : % , MinimumValues as per ASTM B 425

Condition & Grade Tensile Strength Yeild Strength Elognation
Annealed 85 (586) 35 (241) 30

Marine Industry

Round Bar

Incoloy 825 Round Bar

Bright and Black Bars from Sizes 3mm to 150mm

Hex Bar

Incoloy 825 Hex Bar

Sizes from 12mm – 85mm dia

Square Bar

Incoloy 825 Square / Flat Bar

From 15mm to 65mm dia.

© Copyright - Stardust Impex