Inconel 601 Pipe & Tubing

Inconel alloy 601 is a Nickel primarily based alloy with a very high Chromium content (approx. 25wt %) with an addition of Aluminium, built to protect against high temperatures oxidising atmospheres in the heating treatments for metals or materials. The most commonly used thermowell sheathing materials and oxygen injection pipes in the metal and also glass producing industries. The field of usage extends to industrialized furnace retorts or muffles, baskets, jigs and fixtures, wire annealing pipes that have all already been produced within this superior high-temperature material. Tubing in the metal have been used for several years in ceramic tile making in the recent designs of roller hearth ovens as the materials resists the high-temperature burning cycle along with the corrosive effects of the glazes and also stucco used on the tiles.
Inconel alloys are suited to service in extreme conditions exposed to higher pressure and also kinetic energy because of their oxidation- and then corrosion-resistant properties. Inconel forms a thick as well as stable passivating oxide layer guarding the surface from extra attack, while heated, and also its keeps strength over a wide range of temperature. Inconel’s high-temperature strength is produced by strong solution improving or precipitation strengthening, based on the alloy

Standards – Inconel 601 Pipe & Tubing

Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger TubesASTM B 163
Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and TubeASTM B 167

Mechanical Properties – Inconel 601 Pipe & Tubing

Tensile Strength : Unit – ksi (MPa) , Minimum
Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum
Elongation : in 2″, Unit : % , MinimumValues as per ASTM B 167

Condition & GradeTensile StrengthYeild StrengthElognation
Annealed80 (552) 30 (207)30


Welded Pipe

Inconel 601 Pipe

Stocking & Supplying Seamless Pipes as small as 1/4″ NB and 6″ NB. Thickness ranging from Sch 10 to Sch 80.

Tube / Tubing

Inconel 601 Tube / Tubing

Stocking & Supplying Seamless Tubes / Tubing from 6mm OD to 101.6mm OD. Thickness ranging from 0.8mm to 6mm.